1114
High-Current Test Probe 197 mil / 5.0 mm up to 50 A
Series 1075 • 1075/G
1
- For use in burn-in and run-in test
- Transmission of high currents
- Low contact resistance
| Mechanical Data | | |
| Center | 5.00 mm /197 mil |
| Full travel | 5.50 (CLX 10.00 / CL1X 8.5) mm |
| Working travel | 4.40 (CLX 8.00 / CL1X 7.4) mm |
| Spring force at working travel | see high-temperature applications |
| Temperature range | -40 °C - +250 °C |
| Electrical Data | | |
| Continuous current | 50.0 A |
| Typical continuity resistance | ≤ 5 mOhm |
| Materials | | |
| Barrel | Brass, gold-plated |
| Plunger | CuBe, gold-plated/Silver Cap | |
| Receptacle | Brass, gold-plated |
| Recommended diameter of drill | | |
| HP 2361.1 / EP CP 201 (trolitax) | 3.98...3.99 mm |
| HGW 2372 (glass filled material) | 3.99...4.00 mm |
| High-temperature applications | | |
| Temperature range | -40 °C - +250 °C |
| Pre-loaded spring force | 1.50/ 1.50/ 2.50 N |
| Spring force at working travel (order index E) | 3.00/ 5.00/ 10.00 N | |
| Available Screw Tools | | |
| Article Designation | Max. Plate Diameter |
Tip Style • Diameter • Plating
CL1X
3.00C Au
4.00C Au
5.00C Au
| 1075/ | G | - | FX | - | 3.0 N | E | - | Au | - | 4.0 | C |
| [1] | [2] | | [3] | | [4] | [5] | | [6] | | [7] | [8] |
- Series
- Threaded Design
- Tip Style
- Spring Force
- High Temperature
- Tip Plating
- Tip Diameter
- Tip Material (only for CuBe)
