1080
Twist Proof Test Probe 160 mil / 4.0 mm
Serie 1053/G
0
- Anti-turn feature ensured by the square section on the plunger and the slot in the receptacle
- Forced guidance of the test probe ensures that the receptacle must only be aligned once
Mechanical Data | | |
Center | 4.00 mm /160 mil |
Full travel | 5.00 mm |
Working travel | 4.00 mm |
Switching travel (with switching element) | 2.50 mm |
Pre-loaded spring force | 0.30/ 0.40/ 0.50/ 0.80/ 0.80/ 1.00 N |
Spring force at working travel | 0.50/ 1.50/ 2.00/ 3.00/ 4.00/ 5.00 N |
Spring force at working travel (with switching element) | +1.00 N |
Temperature range | -30 °C - +120 °C |
Electrical Data | | |
Receptacle-Plunger |
Max. current rating | 14.0 A |
Typical continuity resistance | ≤ 15 mOhm |
Pin-Plunger |
Max. current rating | 1.0 A |
Typical continuity resistance | ≤ 50 mOhm |
Materials | | |
Barrel | Brass, gold-plated |
Spring | Spring Steel, gold-plated |
Plunger | CuBe | |
Receptacle | Brass, gold-plated |
Recommended diameter of drill | | |
HP 2361.1 / EP CP 201 (trolitax) | 3.01 mm |
HGW 2372 (glass filled material) | 3.03 mm |
Available Screw Tools | | |
Article Designation | Max. Plate Diameter |
Tip Style • Diameter • Plating
1053/ | G | - | Y4 | - | 1.5 N | - | Au | - | 4.0x | 0.65 | C |
[1] | [2] | | [3] | | [4] | | [5] | | [6] | [7] | [8] |
- Series
- Threaded Design
- Tip Style
- Spring Force
- Tip Plating
- Tip Diameter
- Tip Thickness
- Tip Material (only for CuBe)