1106
Push-Back Test Probe, Twist Proof, 100 mil / 2.54 mm
Series 3028.01
1
0
- Push-back test probe for the cable harness test
- Especially suitable for spade-shaped tip style
- Twist proof variant
- Receptacle can be extended with switching element optional
- High soldering temperature up to 300°C
| Mechanical Data | | |
| Center | 2.54 mm /100 mil |
| Full travel | 5.00 mm |
| Working travel | 4.00 mm |
| Switching travel | 2.60 mm |
| Pre-loaded spring force | 1.00/ 2.20/ 4.00 N |
| Spring force at switching travel | 3.10/ 6.80/ 10.70 N |
| Spring force at working travel (without switching element) | 4.30/ 9.30/ 14.30 N |
| Spring force at working travel (with switching element) | +0.70 N |
| Temperature range | -30 °C - +120 °C |
| Electrical Data | | |
| Receptacle-Plunger |
| Continuous current | 3.0 A |
| Typical continuity resistance | ≤ 20 mOhm |
| Pin-Plunger |
| Continuous current | 1.0 A |
| Typical continuity resistance | ≤ 50 mOhm |
| Electric strength | 1.000 V |
| Materials | | |
| Barrel | Brass, gold-plated |
| Spring | Spring Steel, gold-plated |
| Plunger | Steel | |
| Receptacle | Brass, gold-plated |
| Recommended diameter of drill | | |
| HP 2361.1 / EP CP 201 (trolitax) | 2.10 mm |
| HGW 2372 (glass filled material) | 2.11 mm |
| Available Screw Tools | | |
| Article Designation | Max. Plate Diameter |
Tip Style • Diameter • Plating
| 3028 | .01 | - | Y | - | 15.0 N | - | Au | - | 1.5x | 0.5 | /SEV |
| [1] | [2] | | [3] | | [4] | | [5] | | [6] | [7] | [8] |
- Series
- Variant
- Tip Style
- Spring Force
- Tip Plating
- Tip Diameter
- Tip Thickness
- Optional with Receptacle and Switch-Element
