1107
Push-Back Test Probe 160 mil / 4.0 mm
Series 5087
0
- Push-back test probe for the cable harness test
- Suitable when standard head styles are used
| Mechanical Data | | |
| Center | 4.00 mm /160 mil |
| Full travel | 10.00 mm |
| Working travel | 9.50 mm |
| Switching travel | 7.50 mm |
| Pre-loaded spring force | 1.50/ 2.00/ 4.00 N |
| Spring force at working travel | 6.00/ 9.00/ 15.00 N |
| Spring force at switching travel | 4.30/ 6.80/ 12.00 N |
| Temperature range | -30 °C - +120 °C |
| Electrical Data | | |
| Barrel-Probe Tip |
| Continuous current | 20.0 A |
| Typical continuity resistance | ≤ 3 mOhm |
| Connector Probe Tip |
| Continuous current | 1.0 A |
| Typical continuity resistance | ≤ 25 mOhm |
| Electric strength | 1.000 V |
| Materials | | |
| Barrel | Brass, gold-plated |
| Spring | Spring Steel, gold-plated |
| Plunger | CuBe | |
| Recommended diameter of drill | | |
| HP 2361.1 / EP CP 201 (trolitax) | 3.00 mm |
| (Tolerances dependent on carrier material, test drilling is recommended) |
| Available Screw Tools | | |
| Article Designation | Max. Plate Diameter |
Tip Style • Diameter • Plating
C
2.30C Au
2.80C Au
3.00C Au
| 5087 | - | F | - | 15.0 N | - | Au | - | 1.8 | C |
| [1] | | [2] | | [3] | | [4] | | [5] | [6] |
- Series
- Tip Style
- Spring Force
- Tip Plating
- Tip Diameter
- Tip Material (only for CuBe)
