1109
Push-Back Test Probe, Twist Proof, 160 mil / 4.0 mm
Series 5104
1
0
- Push-back test probe for the cable harness test
- Especially suitable for spade-shaped tip style
- Twist proof variant
- Receptacle with switch function
| Mechanical Data | | |
| Center | 4.00 mm /160 mil |
| Full travel | 7.00 mm |
| Working travel | 5.00 mm |
| Switching travel | 3.50 mm |
| Pre-loaded spring force | 0.50/ 1.00/ 1.50/ 3.00/ 4.00/ 3.00/ 4.50/ 5.00/ 4.00/ 9.00 N |
| Spring force at switching travel | 0.70/ 3.80/ 4.65/ 7.90/ 9.10/ 11.40/ 13.95/ 15.50/ 18.70/ 23.70 N |
| Spring force at working travel (without switching element) | 0.75/ 5.00/ 6.00/ 10.00/ 11.25/ 15.00/ 18.00/ 20.00/ 25.00/ 30.00 N |
| Spring force at working travel (with switching element) | +0.75 N |
| Temperature range | -30 °C - +120 °C |
| Electrical Data | | |
| Barrel-Probe Tip |
| Continuous current | 20.0 A |
| Typical continuity resistance | ≤ 3 mOhm |
| Connector Probe Tip |
| Continuous current | 1.0 A |
| Typical continuity resistance | ≤ 30 mOhm |
| Electric strength | 1.000 V |
| Materials | | |
| Barrel | Brass, gold-plated |
| Spring | Spring Steel, gold-plated |
| Plunger | Steel | |
| Receptacle | Brass, gold-plated |
| Recommended diameter of drill | | |
| HP 2361.1 / EP CP 201 (trolitax) | 3.50 mm |
| (Tolerances dependent on carrier material, test drilling is recommended) |
| Available Screw Tools | | |
| Article Designation | Max. Plate Diameter |
Tip Style • Diameter • Plating
A
2.50 Au
3.00 Au
4.00 Au
C
2.40 Au
3.00 Au
4.00 Au
4.80 Au
D
1.75 Au
1.80 Au
2.00 Au
2.30 Au
3.00 Au
3.70 Au
F
1.80 Au
2.00 Au
2.30 Au
3.00 Au
4.00 Au
| 5104 | - | Y | - | 15.75 N | - | Au | - | 2.2x | 1.6 | /SEV |
| [1] | | [2] | | [3] | | [4] | | [5] | [6] | [7] |
- Series
- Tip Style
- Spring Force
- Tip Plating
- Tip Diameter
- Tip Thickness
- Optional with Receptacle and Switch-Element
