1110
Push-Back Test Probe, Twist Proof, 100 mil / 2.54 mm
Series 5203
1
0
- Push-back test probe for the cable harness test
- Especially suitable for spade-shaped tip style
- Twist proof variant
- Receptacle with switch function
| Mechanical Data | | |
| Center | 2.54 mm /100 mil |
| Full travel | 5.50 mm |
| Working travel | 5.00 mm |
| Pre-loaded spring force | 1.20 N |
| Spring force at working travel (without switching element) | 10.00/ 15.00 N |
| Temperature range | -30 °C - +120 °C |
| Mechanical Data with Switch Receptacle | | |
| Switching travel | 2.50 mm |
| Spring force at switching travel | 5.60/ 8.10 N |
| Spring force at working travel (with switching element) | +0.60 N |
| Electrical Data | | |
| Continuous current | 5.0 A |
| Typical continuity resistance | ≤ 30 mOhm |
| Materials | | |
| Plunger | CuBe | |
| Receptacle | Brass, gold-plated |
| Recommended diameter of drill | | |
| HP 2361.1 / EP CP 201 (trolitax) | 2.20 mm |
| (Tolerances dependent on carrier material, test drilling is recommended) |
| Available Screw Tools | | |
| Article Designation | Max. Plate Diameter |
Tip Style • Diameter • Plating
| 5203 | - | Y | - | 10.0 N | - | Au | - | 1.9x | 0.3 | C |
| [1] | | [2] | | [3] | | [4] | | [5] | [6] | [7] |
- Series
- Tip Style
- Spring Force
- Tip Plating
- Tip Diameter
- Tip Thickness
- Tip Material (only for CuBe)
