1111
Push-Back Test Probe, Twist Proof, 118 mil / 3.0 mm
Series 5265
1
0
- Push-back test probe for the cable harness test
- Especially suitable for spade-shaped tip style
- Twist proof variant
- Receptacle with switch function
| Mechanical Data | | |
| Center | 3.00 mm /118 mil |
| Full travel | 5.50 mm |
| Working travel | 5.00 mm |
| Switching travel | 2.60 mm |
| Pre-loaded spring force | 1.00/ 2.00/ 3.00/ 3.80 N |
| Spring force at switching travel | 3.10/ 6.20/ 9.20/ 12.20 N |
| Spring force at working travel (without switching element) | 5.00/ 10.00/ 15.00/ 20.00 N |
| Spring force at working travel (with switching element) | +1.00 N |
| Temperature range | -30 °C - +120 °C |
| Electrical Data | | |
| Barrel-Probe Tip |
| Max. current rating | 8.0 A |
| Typical continuity resistance | ≤ 30 mOhm |
| Connector Probe Tip |
| Max. current rating | 1.0 A |
| Typical continuity resistance | ≤ 50 mOhm |
| Electric strength | 1.000 V |
| Materials | | |
| Barrel | Brass, gold-plated |
| Spring | Spring Steel, gold-plated |
| Plunger | CuBe | |
| Receptacle | Brass, gold-plated |
| Recommended diameter of drill | | |
| HP 2361.1 / EP CP 201 (trolitax) | 2.49...2.51 mm |
| (Tolerances dependent on carrier material, test drilling is recommended) |
| Available Screw Tools | | |
| Article Designation | Max. Plate Diameter |
Tip Style • Diameter • Plating
C
2.00C Au
2.70C Au
3.00C Au
F
1.50C Au
1.80C Au
2.30C Au
3.00C Au
| 5265 | - | Y | - | 15.0 N | - | Au | - | 1.9x | 0.8 | C | /SEV |
| [1] | | [2] | | [3] | | [4] | | [5] | [6] | [7] | [8] |
- Series
- Tip Style
- Spring Force
- Tip Plating
- Tip Diameter
- Tip Thickness
- Tip Material (only for CuBe)
- Optional with Receptacle and Switch-Element
