4022
Standard-Test Probe 75 mil / 1.91 mm for Position Test
0
- Compact design
- Contacting of assembled PCBs
- Test probe geometry for position test
| Mechanical Data | | |
| Center | 1.91 mm /75 mil |
| Full travel | 3.90 mm (D1009) / 4.40 (D1010) mm |
| Working travel | 3.00 mm |
| Pre-loaded spring force | 0.40 N |
| Spring force at working travel | 0.90 N |
| Temperature range | -30 °C - +120 °C |
| Electrical Data | | |
| Continuous current | 3.0...4.0 A |
| Typical continuity resistance | ≤ 20 mOhm |
| Materials | | |
| Barrel | Bronze, gold-plated |
| Plunger | Steel | |
| Receptacle | Bronze, gold-plated |
| Recommended diameter of drill | | |
| HP 2361.1 / EP CP 201 (trolitax) | 1.30 mm |
| With pressed-in ring | 1.36 mm |
| HGW 2372 (glass filled material) | 1.32 mm |
| With pressed-in ring | 1.37 mm |
Tip Style • Diameter • Plating
| | | Tip Style | Tip-Ø
[mm]
A | Plate-Ø
[mm]
B | Tip Length
[mm]
C | Overall
Length [mm]
L | Installation height
[mm]
E | | D1009 | 0.51 | 1.52 | 3.55 | 33.0 | 16.0 | | D1010 | 0.51 | 1.52 | 3.05 | 33.0 | 16.0 |
|
| 1012/Z3 | - | D1009 | - | 0.9 N | - | Au | - | 0.51x3.55/1.52 | C |
| [1] | | [2] | | [3] | | [4] | | [5] | [7] |
- Series
- Tip Style
- Spring Force
- Tip Plating
- Tip Diameter
- Tip Material (only for CuBe)
